Lower voltage High temperature resistant hall-less induction driver pecification
一、功能特點Feature:
● 無感控制Sensorless control
● 過壓欠壓保護、過流保護、過熱保護 Protection beyond the scope of power supply voltage\
overload protection\over-temperature protection.
● 報警Various alarm instructions ● 外部電位器調速speed regulation by External potentiometer
● 外部模擬信號調速speed regulation by External analog signal ● PWM控制調速speed regulation by PWM signal ● 報警后自動復位、重啟Automatic reset and restart after alarm
二、技術參數Technical specification
Project
Min value
Typical value
Max value
Unit
Input voltage
8
48
60
V
Output current
--
50
80
A
Speed control
300
3000
4000
Rpm
Size
154*105*45MM
Ambient temperature
-20
90
℃
Speed control mode
1: 0-5VDC analog input
2: 0-100% duty cycle PWM input (PWM Frequency domain: [1Kz-20KHz)
3: External potentiometer speed control
二、端口描述Port definitions:
Port definitions
Specification
VCC
Power connection
Power supply positive electrode(8v-60v)
GND
Power supply negative electrode
U
Motor connection
Motor line U phase
V
Motor line V phase
W
Motor line W phase
VDD
control single
The positive pole of potentiometer
VS
Speed regulation signal input
COM
The negative pole of potentiometer
EN
Speed feedback signal output
RVS
Potentiometer,reserve(Apply to function extensions)
FG
Output single
Work enable input, connect COM port to work
ALM
Alarm signal output
Red light
indicator light
Alarm indicator,synchronized with ALM signal
Green light
Power on indicator
三、調速說明:Speed regulation description:
Mode 1:Add 0V-5V analog signal to port VS for speed regulation
Mode 2:Add 0%-100% duty cycle PWM signal to port VS for speed regulation,PWM Frequency domain: 1Kz-20KHz
Mode 3:Add potentiometer to port VDD VS COM for speed regulation,10K is recommended for potentiometer.
四、速度反饋說明:
Port FG is Speed signal feedback,
For 8-pole motors, FG frequency * 30 = current speed.
For 4-pole motors, FG frequency * 60 = current speed.
1. Locked rotor protection, motor disconnection protection, if the motor is stuck or the motor line is disconnected, the motor will stop and give an alarm, and the red light will flash quickly and continuously;
2. Overload protection: when the working current is greater than the set current, stop the motor and give an alarm, and the red light flashes once every 1 second; After the speed regulating signal returns to zero, the motor returns to normal operation.
3. Over temperature protection: when the temperature of the circuit board is greater than the set temperature, the motor will stop and give an alarm, and the red light will flash twice every 1 second; After the speed regulating signal returns to zero, the motor returns to normal operation.
4. protection beyond the scope of power supply voltage,when the power supply voltage exceeds the range, the motor will stop and give an alarm, and the red light will flash 3 times every 1 second; After the speed regulating signal returns to zero, the motor returns to normal operation.
四、裝配孔位圖Assembled drawing:
Top view of assembly drawing:
Unit:mm 16 mounting holes, diameter: 3.1mm
五、外部防護Shell and joint description:
1.鋁合金散熱型外殼Aluminum alloy heat dissipation shell
2.格蘭頭防水端子Waterproof connection port
3.驅動器電機聯接端口Drive controller connection port